Question: How to make straight and cross cable?
Answer: Let i tell you...
Firstly i tell you how can make straight cable....
This type of cable will be used most of the time and can be used to..
1. Connect a computer to a SWITCH or Hub's normal port.
2. Connect a computer to a CABLE or DSL modem lan port.
3. Connect a router's WAN port to a CABLE or DSL modem's lan port.
4. Connect a router's LAN port to a SWITCH or Hub's uplink port.
If you need to check how to straight cable looks like.... It's so simple Just both side ( side A and side B) of cable have wire arrangment with same color. Total eight wires on network cable.
Pin no. Side A.............. Side B
1. Orange white........... Orange white
2. Orange.............. Orange
3. Green white........... Green white
4. Blue........... Blue
5. Blue white............. Blue white
6. Green........... Green
7. Brown white........... Brown white
8. Brown............ Brown
Cross Cable:
A cross cable can be used to:
1. Connect to computer directly.
2. Connect a router's LAN port to switch normal port.
3. Connect 2 switch by using normal port in both switches.
Pin no......... side A................ side B
1. .....Orange white...............Green White
2.......Orange........................Green
3......Green White..............Orange Wite
4......Blue...........................Brown White
5......Blue White................Brown
6.........Green..................Orange
7........Brown White............Blue
8.......Brown.......................Blue White
